- Generated by
1.9.1
|
PipeWire
0.3.66
|
Node methods. More...
Data Fields | |
| uint32_t | version |
| int(* | add_listener )(void *object, struct spa_hook *listener, const struct spa_node_events *events, void *data) |
| Adds an event listener on node. More... | |
| int(* | set_callbacks )(void *object, const struct spa_node_callbacks *callbacks, void *data) |
| Set callbacks to on node. More... | |
| int(* | sync )(void *object, int seq) |
| Perform a sync operation. More... | |
| int(* | enum_params )(void *object, int seq, uint32_t id, uint32_t start, uint32_t max, const struct spa_pod *filter) |
| Enumerate the parameters of a node. More... | |
| int(* | set_param )(void *object, uint32_t id, uint32_t flags, const struct spa_pod *param) |
| Set the configurable parameter in node. More... | |
| int(* | set_io )(void *object, uint32_t id, void *data, size_t size) |
| Configure the given memory area with id on node. More... | |
| int(* | send_command )(void *object, const struct spa_command *command) |
| Send a command to a node. More... | |
| int(* | add_port )(void *object, enum spa_direction direction, uint32_t port_id, const struct spa_dict *props) |
| Make a new port with port_id. More... | |
| int(* | remove_port )(void *object, enum spa_direction direction, uint32_t port_id) |
| Remove a port with port_id. More... | |
| int(* | port_enum_params )(void *object, int seq, enum spa_direction direction, uint32_t port_id, uint32_t id, uint32_t start, uint32_t max, const struct spa_pod *filter) |
| Enumerate all possible parameters of id on port_id of node that are compatible with filter. More... | |
| int(* | port_set_param )(void *object, enum spa_direction direction, uint32_t port_id, uint32_t id, uint32_t flags, const struct spa_pod *param) |
| Set a parameter on port_id of node. More... | |
| int(* | port_use_buffers )(void *object, enum spa_direction direction, uint32_t port_id, uint32_t flags, struct spa_buffer **buffers, uint32_t n_buffers) |
| Tell the port to use the given buffers. More... | |
| int(* | port_set_io )(void *object, enum spa_direction direction, uint32_t port_id, uint32_t id, void *data, size_t size) |
| Configure the given memory area with id on port_id. More... | |
| int(* | port_reuse_buffer )(void *object, uint32_t port_id, uint32_t buffer_id) |
| Tell an output port to reuse a buffer. More... | |
| int(* | process )(void *object) |
| Process the node. More... | |
Node methods.
| uint32_t spa_node_methods::version |
| int(* spa_node_methods::add_listener) (void *object, struct spa_hook *listener, const struct spa_node_events *events, void *data) |
Adds an event listener on node.
Setting the events will trigger the info event and a port_info event for each managed port on the new listener.
| node | a spa_node |
| listener | a listener |
| events | a struct spa_node_events |
| data | data passed as first argument in functions of events |
| int(* spa_node_methods::set_callbacks) (void *object, const struct spa_node_callbacks *callbacks, void *data) |
Set callbacks to on node.
if callbacks is NULL, the current callbacks are removed.
This function must be called from the main thread.
All callbacks are called from the data thread.
| node | a spa_node |
| callbacks | callbacks to set |
| int(* spa_node_methods::sync) (void *object, int seq) |
Perform a sync operation.
This method will emit the result event with the given sequence number synchronously or with the returned async return value asynchronously.
Because all methods are serialized in the node, this can be used to wait for completion of all previous method calls.
| seq | a sequence number |
| int(* spa_node_methods::enum_params) (void *object, int seq, uint32_t id, uint32_t start, uint32_t max, const struct spa_pod *filter) |
Enumerate the parameters of a node.
Parameters are identified with an id. Some parameters can have multiple values, see the documentation of the parameter id.
Parameters can be filtered by passing a non-NULL filter.
The function will emit the result event up to max times with the result value. The seq in the result will either be the seq number when executed synchronously or the async return value of this function when executed asynchronously.
This function must be called from the main thread.
| node | a Node |
| seq | a sequence number to pass to the result event when this method is executed synchronously. |
| id | the param id to enumerate |
| start | the index of enumeration, pass 0 for the first item |
| max | the maximum number of parameters to enumerate |
| filter | and optional filter to use |
| int(* spa_node_methods::set_param) (void *object, uint32_t id, uint32_t flags, const struct spa_pod *param) |
Set the configurable parameter in node.
Usually, param will be obtained from enum_params and then modified but it is also possible to set another spa_pod as long as its keys and types match a supported object.
Objects with property keys that are not known are ignored.
This function must be called from the main thread.
| node | a Node |
| id | the parameter id to configure |
| flags | additional flags |
| param | the parameter to configure |
| int(* spa_node_methods::set_io) (void *object, uint32_t id, void *data, size_t size) |
Configure the given memory area with id on node.
This structure is allocated by the host and is used to exchange data and parameters with the node.
Setting an io of NULL will disable the node io.
This function must be called from the main thread.
| id | the id of the io area, the available ids can be enumerated with the node parameters. |
| data | a io area memory |
| size | the size of data |
| int(* spa_node_methods::send_command) (void *object, const struct spa_command *command) |
Send a command to a node.
Upon completion, a command might change the state of a node.
This function must be called from the main thread.
| node | a spa_node |
| command | a spa_command |
| int(* spa_node_methods::add_port) (void *object, enum spa_direction direction, uint32_t port_id, const struct spa_dict *props) |
Make a new port with port_id.
The caller should use the lowest unused port id for the given direction.
Port ids should be between 0 and max_ports as obtained from the info event.
This function must be called from the main thread.
| node | a spa_node |
| direction | a enum spa_direction |
| port_id | an unused port id |
| props | extra properties |
| int(* spa_node_methods::remove_port) (void *object, enum spa_direction direction, uint32_t port_id) |
Remove a port with port_id.
| node | a spa_node |
| direction | a enum spa_direction |
| port_id | a port id |
| int(* spa_node_methods::port_enum_params) (void *object, int seq, enum spa_direction direction, uint32_t port_id, uint32_t id, uint32_t start, uint32_t max, const struct spa_pod *filter) |
Enumerate all possible parameters of id on port_id of node that are compatible with filter.
The result parameters can be queried and modified and ultimately be used to call port_set_param.
The function will emit the result event up to max times with the result value. The seq in the result event will either be the seq number when executed synchronously or the async return value of this function when executed asynchronously.
This function must be called from the main thread.
| node | a spa_node |
| seq | a sequence number to pass to the result event when this method is executed synchronously. |
| direction | an spa_direction |
| port_id | the port to query |
| id | the parameter id to query |
| start | the first index to query, 0 to get the first item |
| max | the maximum number of params to query |
| filter | a parameter filter or NULL for no filter |
| int(* spa_node_methods::port_set_param) (void *object, enum spa_direction direction, uint32_t port_id, uint32_t id, uint32_t flags, const struct spa_pod *param) |
Set a parameter on port_id of node.
When param is NULL, the parameter will be unset.
This function must be called from the main thread.
| node | a struct Node |
| direction | a enum spa_direction |
| port_id | the port to configure |
| id | the parameter id to set |
| flags | optional flags |
| param | a struct POD with the parameter to set |
| int(* spa_node_methods::port_use_buffers) (void *object, enum spa_direction direction, uint32_t port_id, uint32_t flags, struct spa_buffer **buffers, uint32_t n_buffers) |
Tell the port to use the given buffers.
When flags contains SPA_NODE_BUFFERS_FLAG_ALLOC, the data in the buffers should point to an array of at least 1 data entry with the desired supported type that will be filled by this function.
The port should also have a spa_io_buffers io area configured to exchange the buffers with the port.
For an input port, all the buffers will remain dequeued. Once a buffer has been queued on a port in the spa_io_buffers, it should not be reused until the reuse_buffer callback is notified or when the buffer has been returned in the spa_io_buffers of the port.
For output ports, all buffers will be queued in the port. When process returns SPA_STATUS_HAVE_DATA, buffers are available in one or more of the spa_io_buffers areas.
When a buffer can be reused, port_reuse_buffer() should be called or the buffer_id should be placed in the spa_io_buffers area before calling process.
Passing NULL as buffers will remove the reference that the port has on the buffers.
When this function returns async, use the spa_node_sync operation to wait for completion.
This function must be called from the main thread.
| object | an object implementing the interface |
| direction | a port direction |
| port_id | a port id |
| flags | extra flags |
| buffers | an array of buffer pointers |
| n_buffers | number of elements in buffers |
| int(* spa_node_methods::port_set_io) (void *object, enum spa_direction direction, uint32_t port_id, uint32_t id, void *data, size_t size) |
Configure the given memory area with id on port_id.
This structure is allocated by the host and is used to exchange data and parameters with the port.
Setting an io of NULL will disable the port io.
This function must be called from the main thread.
| direction | a spa_direction |
| port_id | a port id |
| id | the id of the io area, the available ids can be enumerated with the port parameters. |
| data | a io area memory |
| size | the size of data |
| int(* spa_node_methods::port_reuse_buffer) (void *object, uint32_t port_id, uint32_t buffer_id) |
Tell an output port to reuse a buffer.
This function must be called from the data thread.
| node | a spa_node |
| port_id | a port id |
| buffer_id | a buffer id to reuse |
| int(* spa_node_methods::process) (void *object) |
Process the node.
This function must be called from the data thread.
Output io areas with SPA_STATUS_NEED_DATA will recycle the buffers if any.
Input areas with SPA_STATUS_HAVE_DATA are consumed if possible and the status is set to SPA_STATUS_NEED_DATA or SPA_STATUS_OK.
When the node has new output buffers, the SPA_STATUS_HAVE_DATA bit will be set.
When the node can accept new input in the next cycle, the SPA_STATUS_NEED_DATA bit will be set.
Note that the node might return SPA_STATUS_NEED_DATA even when no input ports have this status. This means that the amount of data still available on the input ports is likely not going to be enough for the next cycle and the host might need to prefetch data for the next cycle.
1.9.1